Product Introduction
Customized Gate Valve Casting is an opening and closing gate. The movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate valve is sealed by the contact between the valve seat and the gate plate, and usually, the sealing surface is welded with metal material to increase the wear resistance.
Product Feature
1. Lightweight
The body of customized gate valve casting is made of high-grade ductile iron, which is about 20%~30% lighter than the traditional gate valve and is easy to install and maintain.
2. Flat bottom brake seat
3. Overall lagging
The gate is made of high-quality rubber for the overall inner and outer rubber. The European rubber vulcanization technology enables the vulcanized gate to ensure accurate geometric dimensions, and the rubber and the ductile cast gate are firmly bonded, not easy to fall off, and have good elastic memory.
Production Advantage
Customized Gate valve casting
1. Small flow resistance. The medium channel inside the valve body is straight, the medium flows in a straight line, and the flow resistance is small.
2. It is more labor-saving when opening and closing. Compared with the globe valve, whether it is open or closed, the direction of movement of the gate is perpendicular to the flow direction of the medium.
3. The height of the customized gate valve casting is large and the opening and closing time is long. The opening and closing stroke of the gate is large, and the lifting and lowering are carried out by the screw.
